Razer BlackShark V2 X review

The BlackShark V2 X is a wired gaming headset. It connects over analogue 3.5 mm with a 1.3 m cable. It has no Bluetooth, no multipoint, no low-latency dongle, no USB-C charging and no battery, so there is nothing to charge or pair. Razer lists PC, Mac, PS4, Xbox One, Nintendo Switch and mobile devices with a 3.5 mm connector as supported platforms.

That suits a desk setup or a console where you want to plug in and play. It does not suit anyone who wants to move around or switch between devices wirelessly.

The headset uses 50 mm TriForce drivers. Razer quotes a frequency response of 12 Hz to 28 kHz, an impedance of 32 Ω and a sensitivity of 100 dB SPL/mW. Those are the numbers on paper.

Owner feedback is less settled. Some owners say the sound feels muffled and flat with 7.1 surround switched on, and some call it inconsistent overall. If you plan to rely on surround, that is worth weighing.

The surround requirements are also unclear. Razer says 7.1 surround is only available on Windows 11. Tom's Hardware says virtual 7.1 is limited to Windows 10 (64-bit). Check which version applies to your PC before you count on it.

The mic is a HyperClear cardioid, unidirectional design. Razer lists a 100 Hz to 10 kHz range and a 60 dB signal-to-noise ratio. It has click-to-mute. Owners praise the microphone quality, alongside the light weight and comfort of the headset.

Razer's sources differ on the mic's build. Its EU page describes the mic as bendable, while its comparison table calls it a fixed HyperClear cardioid mic. If boom positioning matters to you, check the listing you are buying from.

The headset weighs 240 g. Owners praise its light weight and its comfort over long sessions. Because the praise is about extended wear and the weight is low, it is a sensible pick for long gaming or call-heavy days.

The build gets more criticism. Some owners say it feels fragile. Others find the controls limited and the design too gamer-styled. If you want a plain look or more on-ear controls, this will not please everyone.

The cable is non-detachable and 1.3 m long. Owners report that it can snag and pull the headset off. Because it cannot be swapped, a damaged cable means a damaged headset. That is a practical drawback of a wired design with a fixed lead.

There is no active noise cancelling. Razer's specifications list passive isolation only. In a noisy room, the headset will not reduce background noise electronically. It suits a quieter desk better than a commute or an open office.

This is a headset for people who value low weight, a decent mic and a simple wired connection. The owner reports back that up on comfort and microphone quality. The sound complaints, the fixed cable and the lack of any wireless or noise-cancelling features narrow the audience. If you mainly want clear voice chat on a wired setup, it fits. If music quality or flexibility matters most, look at other options.