Skip to content
sudopicks
esc

NETGEAR MS108EUP Ultra60 PoE++ Multi-Gig Plus Switch vs Ubiquiti UniFi Flex 2.5G USW-Flex-2.5G-8

Researched, not hands-on tested.How we review ›

all judged against network switches at a similar price

The Ubiquiti UniFi Flex 2.5G USW-Flex-2.5G-8 scores 6.9/10 overall, ahead of the NETGEAR MS108EUP Ultra60 PoE++ Multi-Gig Plus Switch at 6.7/10.

The NETGEAR MS108EUP Ultra60 PoE++ Multi-Gig Plus Switch leads on noise and efficiency, poE and firmware and support.

The Ubiquiti UniFi Flex 2.5G USW-Flex-2.5G-8 leads on port speeds, management and port count and uplinks.

The biggest difference is port count and uplinks, where the Ubiquiti UniFi Flex 2.5G USW-Flex-2.5G-8 scores 8/10 to the NETGEAR MS108EUP Ultra60 PoE++ Multi-Gig Plus Switch's 4/10.

NETGEAR MS108EUP Ultra60 PoE++ Multi-Gig Plus Switch

NETGEAR MS108EUP Ultra60 PoE++ Multi-Gig Plus Switch

6.7/10verdict: buy

The MS108EUP is for people who want a silent switch that powers demanding PoE devices and carries 2.5GbE on every port. It suits home offices, small sites and homelabs with PoE++ cameras, access points or similar devices and a need for basic VLANs. It is less suited to anyone who needs a fibre or 10G uplink, or a fully managed feature set.

Typically about £277.97 in the UK when we researched itSearch Amazon UK (opens in a new tab, affiliate link)

Affiliate link. As an Amazon Associate I earn from qualifying purchases. Details

Ubiquiti UniFi Flex 2.5G USW-Flex-2.5G-8

Ubiquiti UniFi Flex 2.5G USW-Flex-2.5G-8

6.9/10verdict: buy

The UniFi Flex 2.5G USW-Flex-2.5G-8 is for people who run a UniFi setup and want eight 2.5G ports in a small switch. It adds a 10G combo uplink, which suits a link back to a faster switch or router. It is a poor fit for anyone who needs PoE output, a CLI or a standalone web interface.

Typically about £150 in the UK when we researched itSearch Amazon UK (opens in a new tab, affiliate link)

Affiliate link. As an Amazon Associate I earn from qualifying purchases. Details

Scores, criterion by criterion

CriterionWeightNETGEAR MS108EUP Ultra60 PoE++ Multi-Gig Plus SwitchUbiquiti UniFi Flex 2.5G USW-Flex-2.5G-8
Port speeds30%7/108/10
Management20%6/107/10
Port count and uplinks15%4/108/10
Noise and efficiency15%9/106/10
PoE10%8/105/10
Firmware and support10%6/105/10
Overall6.7/106.9/10

Specifications

SpecNETGEAR MS108EUP Ultra60 PoE++ Multi-Gig Plus SwitchUbiquiti UniFi Flex 2.5G USW-Flex-2.5G-8
Ports8 copper RJ-45 ports, each 1G/2.5G8 access ports (2.5G/1G/100M/10M) plus one 10G RJ45/SFP+ combo uplink
Port speeds100M, 1G and 2.5G on each portAccess ports 2.5G/1G/100M/10M; uplink RJ45 10G/5G/2.5G/1G/100M; SFP+ 10G/1G
ManagementEasy Smart managed, local web GUI, 64 VLANs, port-based and 802.1Q VLAN tagging, 4 LAGs, IGMP snoopingSpec sheet lists management interface as Ethernet only; managed through the UniFi console, and a reviewer of the PoE variant reports no web UI
PoE budget230 W total PoE budget; ports 1-4 up to 60 W (802.3bt), ports 5-8 up to 30 W (802.3at)No PoE output; powered by USB-C 5V DC 3A or PoE+ input
Uplinks (SFP/SFP+)None listed (no SFP or SFP+ port in manufacturer specifications)One 10G SFP+ port (10G/1G) and one 10 GbE RJ45 port, as a combo uplink
Switching capacity40 Gbps60 Gbps switching capacity, 30 Gbps non-blocking throughput, 45 Mpps forwarding rate
CoolingFanless, 0 fansnot listed

Strengths and weaknesses

NETGEAR MS108EUP Ultra60 PoE++ Multi-Gig Plus Switch

  • + 2.5GbE on all eight ports
  • + 230 W PoE budget with four 60 W ports
  • + Fanless, with a limited lifetime warranty
  • − No SFP or SFP+ uplink listed
  • − Easy Smart management only
  • − Owners report slow or failing firmware updates

Skip it if:

  • Buyers who need an SFP or SFP+ uplink for fibre or 10G links
  • Admins who need controller-managed or layer 3 switching
  • Anyone planning to run all eight ports at full PoE power
Read the full NETGEAR MS108EUP Ultra60 PoE++ Multi-Gig Plus Switch review ›

Ubiquiti UniFi Flex 2.5G USW-Flex-2.5G-8

  • + Eight 2.5G access ports
  • + 10G RJ45/SFP+ combo uplink
  • + Small and light, with flexible power options
  • − No PoE output
  • − Needs UniFi console; no CLI or SSH reported
  • − Owners report limited features, no aggregation

Skip it if:

  • Buyers who need PoE output to power access points or cameras
  • Admins who want CLI, SSH or a standalone web interface
  • Anyone who needs link aggregation or several 10G uplinks
Read the full Ubiquiti UniFi Flex 2.5G USW-Flex-2.5G-8 review ›

More comparisons

Compare all network switches · Best network switches