Geeky GK65 Gaming Keyboard review

The GK65 is a wired 65% keyboard from Geeky. It comes as ANSI with 68 keys or ISO with 69 keys, so buyers can choose between the two layouts. The keyboard measures 310 x 102 x 40 mm and weighs 0.65 kg. It supports full N-key rollover, macros and 1000 Hz polling.

The name covers more than one model. The GK65 Mechanical is listed as hot-swap. The GK65 SE is listed as not hot-swap. An Optical version is listed as hot-swap with optical switches. Check the exact model before buying, because the sockets decide how far you can change the switches later.

Geeky lists Black, Blue, Brown, Red, Speed Yellow and Speed Silver switch options. That is a wide spread to choose from, so you can pick a switch rather than accept a single default. One retailer listing describes the switches as linear.

The stabilisers are listed as pre-lubricated, and the marketing says wire rattle is minimal. That is the manufacturer's claim, not an owner finding.

Owner feedback comes from the related GK61 family, so treat it as a guide rather than direct evidence for the GK65. GK61 reviewers describe the keyboard as very quiet. One source mentions key rattle on the GK61 as a minor issue for some users, and says it is not widespread. With pre-lubricated stabilisers listed and quiet operation reported on the sibling model, the typing side looks sound for a compact board, though the evidence is thin.

The keycaps are ABS with doubleshot printing in an OEM profile. They are not PBT, so anyone who specifically wants PBT will need to replace them.

GK61 reviewers describe the build as solid and premium. Reports on the GK61 SE are less positive: one owner mentions a loose wire port and another a unit that broke after a drop. Both are single mentions, so they do not show a pattern. They do suggest checking the SE variant more carefully than the others.

Hot-swap is the main customisation point. On the GK65 Mechanical, it supports both plate-mounted 3-pin and PCB-mounted 5-pin switches. That lets you try different switches without soldering.

The software side is more limited. Geeky provides software for Windows. Geeky doesn't publish QMK or VIA firmware, so anyone who wants to configure a board through those tools should look elsewhere.

The GK65 connects over wired USB-C. It ships with a detachable 1.5 m USB Type-C to Type-A cable. There is no Bluetooth or 2.4GHz mode listed, so it stays tied to a cable and a single host at a time. That suits a fixed desk setup better than a keyboard you move between machines.

The 65% layout keeps the footprint to 310 mm wide. The ISO version has 69 keys against 68 on the ANSI version, so pick the one that matches the layout you type on. Typing angle adjustment is not listed in the specifications.

The available owner comments are about the GK61 and GK61 SE rather than the GK65 itself. They point to a quiet, solidly built board, with minor rattle and some hardware complaints on the SE.

With hot-swap on the Mechanical model and six switch options, the GK65 suits someone who wants to experiment with switches on a compact, wired board. Because QMK and VIA firmware isn't published, it is a weaker fit for anyone who wants to configure the board through those tools. The ABS keycaps and wired-only connection are straightforward limits to weigh before buying.