Skip to content
sudopicks
esc

APC Back-UPS Pro BR1600MI vs PowerWalker Basic VI 2200 STL

Researched, not hands-on tested.How we review ›

all judged against UPS units at a similar price

The APC Back-UPS Pro BR1600MI scores 6.0/10 overall, ahead of the PowerWalker Basic VI 2200 STL at 5.9/10.

The APC Back-UPS Pro BR1600MI leads on runtime and battery and UK outlets and build.

The PowerWalker Basic VI 2200 STL leads on NAS and server integration.

They score the same on topology and waveform and capacity.

The biggest difference is NAS and server integration, where the PowerWalker Basic VI 2200 STL scores 7/10 to the APC Back-UPS Pro BR1600MI's 4/10.

APC Back-UPS Pro BR1600MI

APC Back-UPS Pro BR1600MI

6.0/10verdict: wait for deal

The APC Back-UPS Pro BR1600MI is a 1600 VA / 960 W line-interactive UPS for people who want to protect a NAS, router and switch. It suits buyers who want a battery they can swap themselves and six backed-up outlets. It is a weaker fit if automatic shutdown over USB is essential, because compatibility is unconfirmed.

Typically about £370.76 in the UK when we researched itCheck price at Amazon UK (opens in a new tab, affiliate link)

Affiliate link. As an Amazon Associate I earn from qualifying purchases. Details

PowerWalker Basic VI 2200 STL

PowerWalker Basic VI 2200 STL

5.9/10verdict: wait for deal

The PowerWalker Basic VI 2200 STL is a line-interactive UPS for people who want a high power rating for a small stack of network and storage gear. It suits a NAS, router and switch setup that needs USB-signalled shutdown more than long battery time. Buyers should check the exact model before ordering, because the research could not confirm the listing matches this model.

Typically about £188.85 in the UK when we researched itCheck price at Amazon UK (opens in a new tab, affiliate link)

Affiliate link. As an Amazon Associate I earn from qualifying purchases. Details

Scores, criterion by criterion

CriterionWeightAPC Back-UPS Pro BR1600MIPowerWalker Basic VI 2200 STL
Topology and waveform25%5/105/10
NAS and server integration25%4/107/10
Capacity20%8/108/10
Runtime and battery15%7/104/10
UK outlets and build15%7/105/10
Overall6.0/105.9/10

Specifications

SpecAPC Back-UPS Pro BR1600MIPowerWalker Basic VI 2200 STL
Capacity (VA / W)1600 VA / 960 W2200VA / 1320W
TopologyLine-interactiveLine-interactive
Output waveformnot listedSimulated sine wave
Outlets8 IEC C13: 6 with battery backup and surge, 2 surge-only; input IEC C14Type F, Type E or Type G (4)
Runtime at half load1 h 8 min at 100 W (manufacturer figure)3.9 minutes at half load
USB / network managementUSB port presentUSB with HID support
BatterySealed lead-acid, 24 V nominal, replacement cartridge APCRBC166, user-replaceable without tools2 x 12V / 9Ah

Strengths and weaknesses

APC Back-UPS Pro BR1600MI

  • + 960 W / 1600 VA rating with six battery-backed outlets
  • + Battery is user-replaceable without tools
  • + Six battery-backed IEC C13 outlets plus two surge-only
  • − No confirmed USB HID or NUT support for NAS shutdown
  • − Waveform is disputed between retailers and unstated by APC
  • − Half-load runtime is not published

Skip it if:

  • Buyers who need confirmed automatic NAS shutdown over USB HID or NUT
  • Buyers with equipment that requires a confirmed pure sine waveform
  • Buyers who need a published runtime at half load
Read the full APC Back-UPS Pro BR1600MI review ›

PowerWalker Basic VI 2200 STL

  • + 1320W rating (2200VA at 0.60 power factor)
  • + USB with HID support listed
  • + Line-interactive topology
  • − Simulated sine wave output
  • − Only 3.9 minutes at half load
  • − Model identity unconfirmed on retailer listing

Skip it if:

  • Buyers whose equipment requires pure sine wave output
  • Anyone needing long battery runtime at half load
  • Buyers who need confirmed NAS compatibility or warranty detail before ordering
Read the full PowerWalker Basic VI 2200 STL review ›

More comparisons

Compare all UPS units · Best UPS units